Basic Info.
Model NO.
Printing steel plates 2
Material
SGCC, CGCC, Dx51d+Z, Sglc, Q195
Packaging
Sea Worthy Standard
Painting Top
12-25microns
Painting Back
5-15microns
Transport Package
Standard Exporting Packing
Specification
JIS G 3312, ASTM A755, EN10169, GB/T2518
Product Description
Shandong Boxing Jiacheng Steel Plate Co., Ltd. Is located in Boxing Economic Development Zone, Binzhou, Shandong.
We are a manufacture for GI , PPGI and PPGL for roof and Clad We have our own R & D group.Production description
Printing steel plates is also known as printing color steel plate. It is technology of printing all kinds of patterns on steel plates by transferring printing and overprinting. The more common are: wood pattern plate, camouflage plate, brick pattern plate, rock pattern plate and printing plate, etc. Substrate can adopt cold-rolled substrate, hot galvanized substrate, galvalume steel plate, and we should choose materials of suitable mechanical properties according to different purposes. And we can produce products of different patterns and colors according to client's specific requirements. The paint luster shall be controlled at light and matt between 30-60 degrees, because high gloss paint used in building shall reflect sun light strongly and dazzle. If it is within room, it could easily lead to visual fatigue at night under the lights.
Cold-rolled color printing steel plate
Cold-rolled color printing steel plate which has deep drawing properties is generally used for production of doors, and this kind of color printing steel plate must use special paint for reaching all requirements of door production. In addition, ordinary color printing plate produced by cold-rolled substrate has limited corrosion resistance, because any minor abrasion on surface paint shall cause red rust and affect usage, and the colored paint layer of this kind of substrate can be used for producing household appliances' internal parts or temporary fences which are not high.
Galvanized color printing steel plate and galvalume color printing steel plate.
Galvanized (Galvalume) color printing steel plate has protective zinc layer, so it has higher corrosion resistance than the cold-rolled color printing steel plate. When producing products and parts which requires corrosion resistance, we can consider choose color printing steel plate which uses galvanized(galvalume) steel plate as substrate. For example, indoor and outdoor decorative wallpapers, furniture, lighting equipments, and other signage. In this condition, Primer plus topcoat coating thickness >=20um, and product performance can achieve the intended purpose.
1 Wood Pattern Plate
Product overview: wood pattern color printing steel plate with its superior surface pattern lines, can take the place of wood by steel, and reduce cost, it has low carbon and can protect environment. And it has been widely used in recent years in decoration, furniture and other fields.
Product features: It does not wear, fade paint, and it can be fire-proof, corrosion-proof and protect environment.
Product usage: Wood pattern is suitable for usage in building, decoration, appliances, furniture, roof panel, wall panel and production of all kinds of doors.
1 Printing plate
Product overview: Printing color steel plate has wide ranges of color and usages. It can not only produce all kinds of patterns according to client's requirements but also reflect the three-dimensional feeling, concavity, color gradation and diversity and good formability. It mainly contains rock pattern plate, brick pattern plate, camouflage plate and flower pattern plate, etc.
Product features: Through continuous roller coating, this kind of printing color steel plate has very bright color, and it has features as fire-proof, corrosion proof, scratch-proof, and easy processing and it is beautiful and durable. So the printing color steel plate production is easy, and it satisfies economic requirements and also has the same feature for environmental protection and energy saving as normal color steel plate.
Product usage: It is used for outer wall of building, ceiling, indoor decoration, shutter door production, military facilities, etc and can also be used for refrigerator side panels, rear plates, washer tank, water heaters outside tub, microwave ovens tub shell and other appliances.
Treatment layer | Thickness | Sort | Technology |
Paint coating | 50μm | Polyethylene | Prevent scratches and contamination (optional) |
Varnish | 10μm | Polyester, Acrylic | Protect printed layer and enhance the appearance |
Printing | Less than 1μm | Inks, Polyester | Pattern diversity |
Surface painting | 20μm | Polyester | Chemical resistance, processability, increase the diversity of color |
Bottom painting | 5μm | Polyester | Improve topcoat adhesion, workability and corrosion resistance |
Chemical treatment | Less than 1μm | Chromium solution | Improve product resistance to corrosion |
Substrate | 0.12-1.2mm | Cold plate, galvanized(galvalume) | GI ,GL ,CR |
Back painting | 5μm | Epoxy | Improve product resistance to corrosion and adhesion. |
Advantages of Our Prepainted Galvanized Steel Coil
1.Excellent corrosion resistance: The zinc layer provides a good protection of Pre-painted Galvanizeed Steel Sheet.
2.High heat resistance: The reflective surface of the material aids in efficiently reflecting the sunlight away and in turnreducing the amount of heat transmitted.
The thermal reflectivity converts into energy savings.
3.Aesthetics: Pre-Painted Galvanized steel sheet is available in plethora of patterns and multiple sizes as per the requirements that given by our customers.
4.Versatility: can be used in the various areas.
Q&A Acceptable payment term and way ?
T/T,L/C, T/T + L/C
Q&A Acceptable price term
FOB CFR CIF
Q&A What is the validity of your quotation?
Normally 7 days.
Q&A What is your advantage?
24 hour quick response /Customer oriented/ Credit foremost/ Top quality Excellent
Q&A What is your acceptable payment term?
TT,LC
Q&A Why to Choose us?
·ISO System. SGS and BV from third party.
· Finished Product More Than 150000 Tons.
· We have the most convenient transport and prompt delivery.
· We offer competitive price with best service.
· We have high technical production line with top quality products.
· We have win high reputation based on best quality products.
Eric Han
Qingdao Boda Ocean International Trade Co., Ltd.
Shandong Boxing Jiacheng Steel Plate Co., Ltd.
Tel: +86 18205321110
sd-jcsteel.en.made-in-china.com
Line:+86 18205321110
Address:
1-1906 International Center, No.7 Shandong Road, Shinan Distrcet, Qingdao, Shandong,China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Construction & Decoration
Management System Certification:
ISO 9001
Company Introduction:
Our company has two production lines of international advanced level with annual output of 150, 000 tons each line. All the production based on the national standards and related industrial standards, we also can produce according to the requirements of customer.
To cater international demands, this year we set up a foreign trade company in Qingdao city (Qingdao Boda Ocean International Trade Co., Ltd. ). It is more convenient for import and export business. Although our company is a newly established foreign trade company, it has built long term cooperation with many domestic trade companies since 5 years ago. Besides, our products exports to many countries, such as Vietnam, India, Korea, Israel, Ukraine, UAE and so on.
Believing in "good better best", we have established professional systems of the production quality assurance. Meantime, our company constantly develops new products. Under the principle of honest, equality and mutual benefit, we have established a stable raw materials supply and distribution network with a large number of domestic and foreign customers.
No matter when, all of our employees follow the principles of scientific management, standard production, better service to establish stable coorperation with our customers. We believe in we will create brilliant future together.